Loading Documents in the ADF (Automatic Document Feeder) - MX410

Article ID: ART176512 | Date published: 02/13/2020 | Date last updated: 02/13/2020


Learn how to load original documents into the ADF (Automatic Document Feeder) of the PIXMA MX410.



Loading Originals in the ADF (Automatic Document Feeder)

You can load documents to copy, fax, or scan in the ADF.

  1. Make sure that any original has been removed from the scanner glass.

  2. Load a document in the ADF.

    1. Open the Document Tray.

    2. Insert the document in the Document Tray until you hear a beep sound.
      Load the document WITH THE SIDE TO SCAN FACING UP in the Document Tray.

 If you have set the alarm to be silent under Device user settings in Device settings, the alarm will not beep when a document is inserted in the Document Tray.

  1. Adjust the Document Guides to match the width of the document.
    Do not slide the Document Guides too hard. The document may not be fed properly.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments