How do I make a 2-sided copy on my imageCLASS MF267dw/264dw?

Article ID: ART176558 | Date published: 03/06/2020 | Date last updated: 03/17/2020


 The MF267dw and MF264dw printers do not have an automatic document feeder capable of doing 2-sided copying (scanning). In order to make a 2-sided copy, follow the steps below (using the platen glass).


  1. Place your original document face-down on the platen (copy) glass.
    NOTE: You cannot use the ADF (automatic document feeder) for this process.

  2. Press (COPY/SCAN) on the control panel.

  3. Press the down arrow twice, the display should show "2-Sided: Off" and then press the "OK" button.

  4. Select (using the up/down arrows) "1 -> 2 Sided" and then press the "OK" button.

  6. Press the "Start" button (the LED should be green).

  7. On the display screen, it should read "Scan Size" and the default setting is set to "LTR". Press the "OK" button once again to begin the scan.

  8. Once the scan has been completed (the printer is silent once again), open the top of the printer and flip the original document over to the other side. Close the top of the printer and press the "Start" button once again.

  9. Upon completion of the scan (the printer is quiet once again), press the "OK" button. This will print out your 2-sided copy.

  10. If you have more 2-sided documents you wish to copy, please repeat steps 1 - 8 again.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments