Merging multiple exposures with a RAW image recorded on the card (EOS-1D X Mark III)
Article ID: ART176574
|
Date published: 03/11/2020
|
Date last updated: 03/11/2020
Description
You can select a RAW image recorded on the card as the first single exposure. The selected RAW image will remain intact.
Solution
Merging Multiple Exposures with a RAW Image Recorded on the Card
1.
Select [Select image for mult. expo.].
2.
Select the first image.
Turn the <> dial to select the first image, then press <>.
Select [OK].
The file number of the selected image will be displayed at the bottom of the screen.
3.
Take the picture.
When you select the first image, the number of remaining exposures as set with [No. of exposures] will decrease by 1.
Caution
JPEG/HEIF images cannot be selected.
These images cannot be selected as the first single exposure: images shot with [: Highlight tone priority] set to [Enable] or [Enhanced], or images with cropping information.
[Disable] is applied for [: Lens aberration correction] and [: Auto Lighting Optimizer], regardless of the settings of the image selected as the first single exposure.
The ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first image will also be applied for the subsequent images.
If Picture Style is [Auto] for the image selected as the first image, [Standard] will be applied for shooting.
You cannot select an image taken with another camera.
Images that cannot be merged may be displayed.
Note
You can also select a RAW image used in multiple-exposure shooting.
> dial to select the first image, then press <
>.
: Highlight tone priority] set to [Enable] or [Enhanced], or images with cropping information.
Note