When using a lens equipped with Image Stabilizer, set the lens's Image Stabilizer switch to <
>.
1.
|
Select [ : Movie digital IS].
 |
2.
|
Select an option.
 |
- Disable (
 )
Image stabilization with Movie digitral IS is disabled.
- Enable (
 )
Camera shake will be corrected. The image will be slightly magnified.
- Enhanced (
 )
Compared tom when [Enable] is set, stronger camera shake can be corrected. The image will be more magnified.
|
 Caution |
- Movie digital IS will not function when rthe lens's optical Image Stabilizer switch is set to <
 >.
- Although movies can also be recorded with Movie digital IS when [
 ] is set, the image area is further reduced.
- With a lens whosde focal length is longer than 800mm, Movie digital IS will not function.
- Stabilization by Movie digital IS may be less effective at some movie recording sizes.
- The wider the angle of view (wide angle), the more effective the image stabilization will be. The narrower the angle of view (telephoto), the less effective the image stabilization will be.
- When using a tripod, setting Movie digital IS to [Disable] is recommended.
- Depending on the subject and shooting conditions, the subject may blur noticeably (then subject momentarily looks out of focus) due to the effects of Movie digital IS.
- When using a TS-E lens, fish-eye lens, or non-Canon lens, setting Movie digital IS to [Disable] is recommended.
- Since Movie digital IS magnifies the image, the image looks more grainy. Noise, dots of light, etc. may also become noticeable.
|
