How to properly clean/sanitize the exterior of your imagePROGRAF printer

Article ID: ART176595 | Date published: 03/19/2020 | Date last updated: 03/19/2020


 Follow the steps below to properly clean your imagePROGRAF printer.


For the parts you will touch such as the buttons, touch panel, covers, and handles, wipe them with a soft cloth moistened with rubbing alcohol.



1. DO NOT spray or apply disinfectant alcohol or any other liquid directly to the touch panel edge or any other parts where the liquid may enter through the gap.
2. Commercial wet wipes contain ingredients other than alcohol. Use of them is not recommended.
3. This cleaning method does not guarantee the effectiveness of disinfection against the coronavirus. Sterile effect against the virus requires inspection and confirmation by the specialized agencies.
4. Alcohol is flammable. DO NOT use it near fire.
5. Depending on the type of alcohol or wiping method, the printer exterior may be discolored or lose the color, however, the printer function will not be affected

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments