Paper Settings on the Printer - PIXMA TR150

Article ID: ART176638 | Date published: 03/25/2020 | Date last updated: 08/19/2021


Learn about paper settings that can be adjusted on the PIXMA TR150's LCD screen


Review the information below to learn about paper settings.

Default settings for the misprint message

To prevent misprints, register the paper size loaded in the rear tray in the printer's settings first. This will allow the printer to display a message if the loaded paper size does not match the print settings in the computer.

 The default display setting is different when you print from a mobile device, Windows® computer, or macOS®.

 If the misprint message is disabled, you will still get a printout even if the printer settings from the computer and the paper information registered to the printer are different. Based on the size of the paper, this may cause poor print results.


Paper settings

  1. Load the paper in the rear tray.

    Figure; Paper loaded into TR150

  2. The rear tray paper registration information is displayed.

    Figure: Rear tray paper registration screen

  3. If the page size on the LCD matches the size of the paper loaded in the rear tray, select OK.

  4. If not, select Change to change the setting to match the size of the loaded paper.


Computer print settings are different from the paper information registered to the printer

 For example: A4 paper is registered to the printer and A5 paper is set up in the computer.

Figure: Mismatch between loaded paper and settings on the computer

  1. When you start to print, a message will appear.

    Figure: Support Code 2114 on the LCD

  2. Review the message and select Next.

  3. When the select the operation screen is displayed, select one of the operations below. Please note, the options may be different based on printer settings.

  • Print on set paper.

    • Select if you want to print on the paper loaded without changes to the paper settings.

    • For example: When the computer print setting is A5 and the paper information registered to the printer is A4, the printer will print right away without a warning to change the settings.

  • Replace paper

  • Cancel print

    • Select when you change the paper settings specified. Change the paper settings and print again.


If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments