Changing the Printer Operation Mode (Mac) - TR150

Article ID: ART176644 | Date published: 03/25/2020 | Date last updated: 03/26/2020


Learn how to adjust how the PIXMA TR150 operates when using it with a Mac.


Changing the Printer Operation Mode

If necessary, switch between various modes of printer operation.

  1. Make sure that the printer is powered on and select Printer settings from the Remote UI.

  2. If necessary, complete the following settings:

    Custom settings - Detect paper setting mismatch

    If the check box is deselected, at the time of printing from PC, you can continue to print without the message display even if the paper settings set in the Print dialog differs from the paper information registered to the printer.

    Ink drying wait time

    You can set the length of the printer rest time until printing of the next page begins. The wait time becomes longer as the value set in the list increases, and shorter as the value decreases.
    If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
    Reducing the ink drying wait time speeds up printing.

  3. Select OK.

    The printer will operate with the settings you selected.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments