Ask a Question

Updating your camera to use image.canon.

Article ID: ART176721 | Date published: 04/14/2020 | Date last updated: 04/20/2020
 

Description

The following procedure(s) will need to be followed to update your camera to use image.canon. Depending on the model of your camera, you may require update via EOS Utility, a firmware update, or a refresh of the web services via the camera's menu.

Solution

If you use the Web Service image sending function for cameras, you must update the settings for the camera you use, as your data migrates to image.canon. Please see the table below and update the settings for your camera.
The Web Service image sending function cannot be used for some products, even after the image.canon service launches.
Cameras Camera settings update procedure
EOS
R / Ra / RP
90D
M6 Mark II / M6
M5
M50
M100
M200
EOS Rebel SL3

PowerShot
G1 X Mark III
G7 X Mark III
G7 X Mark II
G9 X Mark II
G5 X Mark II
SX740 HS
SX730 HS
SX720 HS
SX620 HS
SX540 HS
SX430 IS
SX420 IS
SX70 HS
ELPH 360 HS
ELPH 200 IS
ELPH 200 IS
Open the [Wi-Fi functions] menu screen, and click the  button to update your camera settings. The update is complete when the  icon appears.
If the  button is not displayed, switch screens with the  button.
wi-fi menu
The  icon may not switch to the  icon for some products. In this case, you can upload images to image.canon by pressing the  icon.
EOS
5D Mark IV
6D Mark II / 6D
80D / 70D
Rebel T7i
Rebel T7
Rebel T6i
Rebel T6
Rebel T6s
Rebel SL2
77D
You need the latest version of EOS Utility. Download and install from the support page on the website of the Canon in your area.

Launch the EOS Utility on your PC, and connect your camera to the computer. After it has been connected, click [Web Service settings].
Delete all of the icons in the pane on the left-hand side, and add the icon for the new service in the pane on the right-hand side to the pane on the left. Click [OK] to update the camera settings.
eos utility
PowerShot
G1 X Mark II
G3 X
G5 X
SX530 HS
A firmware update is required. Please visit the support page on the site of the Canon store in your area. After the firmware upgrade, perform the following procedure.
Open the [Wi-Fi functions] menu screen, and click the  button to update your camera settings. The update is complete when the  icon appears.
If the  button is not displayed, switch screens with the  button.
wi-fi menu
The  icon may not switch to the  icon for some products. In this case, you can upload images to image.canon by pressing the  icon.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments