Ask a Question

Calibrate the Scanner from a Mac - MX922

Article ID: ART176729 | Date published: 04/17/2020 | Date last updated: 04/17/2020
 

Description

If scanned images have incorrect colors, calibrating the scanner may help resolve the problem.

Solution

If scanned images have incorrect colors, you may need to calibrate your scanner. Follow the steps below to perform a scanner calibration.

  1. Open ScanGear (the scanner driver). You can open this from IJ Scan Utility:

    Click ScanGear in the IJ Scan Utility window (outlined in red)

    Some image editing programs may have TWAIN support, which will allow you to open ScanGear. Please refer to the documentation for your image editing program for more information.

  2. Select Preferences.

    Click Preferences at the lower right (outlined in red)

  3. With the Scanner tab selected in the Preferences window, set ON in the pop-up menu for Execute at Every Scan under Calibration Settings.

    Select ON from the pop-up menu under Calibration Settings (outlined in red)

  4. Select OK.

  5. Perform a scan in ScanGear. Adjust any options as needed in the Basic Mode or Advanced Mode tabs, then select Scan.
    The scanner will be calibrated before the scan is performed.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments