How to activate the Auto Replenishment Service (ARS) on the MF260 Series printer

Article ID: ART176744 | Date published: 04/27/2020 | Date last updated: 04/28/2020


These are the instructions to activate theToner Delivery Set. to allow your device to communicate with Canon's Auto Replenishment Service.

The models covered in this article:
  • MF269dw
  • MF267dw
  • MF264dw


Step 1: Update to Latest Firmware
• Select Menu

• Select System Management Settings

• Select Update Firmware

• Select Via Internet
• Install firmware update (if applicable)
• You will see a notification confirming that your firmware version is latest available
• If firmware update is needed, your device will power off and restart once the update is complete

Note: This step is necessary for online enrollment
Step 2: How to Retrieve Serial Number, Check Digits / Verification Code
• Select Menu

• Select Toner Delivery Settings

• Select Register for Toner Replenishment

• Select Yes to print serial number and verification code
• Select Close to continue or Cancel to stop printing

Step 3: Activate Auto Replenishment Service
• Follow above instructions to get to Menu
• Select Toner Delivery Settings

• Select Toner Delivery Settings

• Select Activate to begin setup

• Select Next button after reading first confirmation screen

• Select Accept button to accept and continue setup

Step 4: Final Validation Steps
Next, you should see the following validation screen
• Select OK button

• If an error message occurs, follow on-screen instructions
• Check server connection status by selecting
Server Connection Status

You should see the following Successful screen


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments