|
If the camera cannot be connected to a computer, it may be due to the following reasons. Therefore, please check the following items in order to find the cause of the problem.
1. A Wi-Fi connection is established If the camera is already connected via Wi-Fi, it cannot communicate with any computer connected with an interface cable (sold separately).
2. The camera is not properly connected to the computer with the USB cable The computer should recognize the camera once the USB cable is changed and reconnected to the computer.
Use a cable that has a Micro-B plug for the camera.
A genuine Canon accessory is also available (Interface Cable IFC-600PCU).
3. The camera is not recognized by EOS Utility If the camera is not recognized by EOS Utility, refer to the following information for possible solutions.
- The supported software version may differ depending on the camera you use and the operating system installed on the computer. (Version 3.10.30 or later is supported.)
- When using a camera or computer that differs from the model used initially, install the supported version of EOS Utility. EOS Utility Updater for a variety of cameras/operating systems can be downloaded from the Canon Web site.
- For details on system requirements that are compatible with the application, refer to the Related information at the bottom of this page.
- EOS Utility and the camera may not communicate normally with a cable other than the EOS DIGITAL camera-dedicated Canon interface cable.
- Connect your camera and computer directly with the interface cable. Do not connect the camera via a hub; doing so may prevent EOS Utility and your camera from communicating normally.
- If there is insufficient charge left in the camera battery, the camera cannot communicate with EOS Utility. In this case, replace the battery with a charged one, use the DC Coupler DR-E6 and AC Adapter AC-E6N (each sold separately). Your computer does not supply power to the camera through the interface cable.
NOTE
- AC Adapter Kit ACK-E6 can also be used.
4. CameraWindow is being used Your camera does not support CameraWindow. If you are using CameraWindow, install and use the EOS Utility application.
NOTE
If your computer does not meet the system requirements for EOS Utility, you can import images using a card slot on the computer or a commercially available card reader. For the procedures for importing images using a card reader or a card slot on a computer, please see the Related Information.
5. The camera is not recognized by Windows OS If the descriptions in items 1 through 4 above do not apply to your situation, the camera may not have been recognized by your computer's OS. For information on how to work around this, please see the Related Information.
|
