Lamp indications (SELPHY SQUARE QX10)
| Article ID: ART176870 |
| |
Date published: 05/27/2020 |
| |
Date last updated: 05/29/2020 |
Description
Lamp indications (SELPHY SQUARE QX10)
Solution
| Solution |
| STATUS lamp | CHARGE lamp | Status |
| Off | Off | Power off (Not charged) |
| Blinks slowly green | Charging in progress (Power off) |
| Lights green | Charging complete (Power off)*1 |
| Blinks slowly white | Off | Printer start-up in progress |
| Blinks white | Off | Processing... |
| Blinks quickly white | Off | Remove the printed paper. |
| Lights white | Off | Standing by to print (Not charged)*2 |
| Blinks green | Standing by to print (Battery level low) |
| Blinks slowly green | Standing by to print (Charging in progress) |
| Lights green | Standing by to print (Charging complete) |
| Blinks slowly red | Blinks slowly green | Outside the operating temperature range so charging has paused. |
| Blinks red | Off | An error occurred. Check the app message. |
| Blinks green | The battery level is low so printing is not possible. Charge the battery. |
| Blinks quickly red | Off | An error occurred. Turn the power off and then on again. |
| Blinks quickly green | A battery error occurred. |
*1 After a while, the CHARGE lamp turns off.
*2 You can check the battery level by pressing the Power button in the Standing by to print (Not charged) status. |
NOTE
- CHARGE lamp blinks two times:
The battery level is low, but the printer can still be used.
- CHARGE lamp blinks three times:
The battery level is suffi cient.
|
|
ID: 8204756100_EN_3
|
