Specifying a Paper Size in the Rear Tray - TS6320

Article ID: ART176884 | Date published: 06/04/2020 | Date last updated: 06/04/2020
 

Description

You can specify the rear tray paper size of the PIXMA TS6320.

Solution

If you want to manually specify the paper size in the rear tray of the PIXMA TS6320, follow the steps below.

  1. With the printer powered on, press the OK button on the HOME screen.

  2. Use the up and down arrow to select Feed settings. Press the OK button.

  3. Use the up and down arrow to select Detect paper width. Press the OK button.

  4. Use the up and down arrow to select Disable. Press the OK button.

  5. You'll be back to the Feed settings menu. Use the up or down arrows to select Rear tray paper settings. Press the OK button.

  6. Select Change and press the OK button.

    Select Change and press the OK button

  7. Use the up and down arrows to select the paper size loaded into the rear tray. Press the OK button.

    Select the paper size and press the OK button

  8. Use the up and down arros to select the paper type loaded in the rear tray. Press the OK button.

    Select the paper type and press the OK button

  9. With your paper size and type specified, make sure that OK is selected. Press the OK button.

    Confirm your paper choices and press the OK button

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments