[All] Firing multiple receivers as a single flash unit
This is convenient when a high level of flash output is needed. All flash units are controlled to fire with the same output and provide standard exposure.
All receivers fire as part of the same group, regardless of whether they are assigned to firing group A, B, or C.
-
Set [Firing group] to [All].
-
Take the picture.
[(A:B)] Firing multiple receivers in multiple groups
You can divide receivers into flash groups A and B, and you can adjust the relative output of each to obtain the desired lighting.
Referring to the instruction manual of the flash unit, assign some receivers to firing group A and others to firing group B, and arrange them as shown.
-
Manually raise the flash.
-
Select [: Flash control].
-
Select [Evaluative].
-
Select [Built-in flash settings].
-
Select [CustWireless].
-
Select [Wireless func.].
-
Select [].
-
Set [Firing group] to [(A:B)].
-
Set the A:B firing ratio and shoot.
Caution
- Flash units in group C will not fire when [Firing group] is set to [(A:B)].
Note
- Firing ratios from 8:1 to 1:1 to 1:8 correspond to 3:1 to 1:1 to 1:3 (in 1/2-stop increments) when converted to number of stops of exposure.