You can connect your PIXMA MG3120 / MG3122 to a wireless router by entering the printer's WPS PIN code into the router's internal settings. Follow the steps below to use this method to establish a wireless connection between the printer and your network.
-
Make sure that the LED (Light Emitting Diode) is lit as shown in the illustration below.
-
Press and hold the Maintenance button (A) on the printer (for about 5 seconds).
-
Make sure that the bottom segment of the LED (Light Emitting Diode) flashes.
-
Press the Color button. The wireless connection setting information including the PIN code will be printed.
-
You will need to enter the PIN code into the router's internal settings. Please refer to the documentation that came with your wireless router for instructions on entering this informaiton.
-
Press the SCAN button on the printer.
-
Make sure that the the LED (Light Emitting Diode) begins flashing. The bottom segment will flash, then the middle segment, followed by the top segment. The middle segment is lit in the illustration below.
-
When the wireless connection has been established, the LED (Light Emitting Diode) lights up for about 3 seconds, then changes to "1" as shown in the illustration below. Make sure that the Wi-Fi lamp (blue) of the printer is lit.
The printer is now connected to your wireless network.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________