Main Parts of the Printer (Rear View) - PRO-300

Article ID: ART177162 | Date published: 07/21/2020 | Date last updated: 07/27/2020


Learn about the parts found on the back of the imagePROGRAF PRO-300.


Rear View

Rear view of printer

A: Paper Support

Pull out to load paper in the manual feed tray.

B: Manual Feed Tray

Load one sheet of 8" x 10" (20 x 25 cm) size paper or larger, or thick paper at a time.

 Learn how to load a sheet of paper into the Manual Feed Tray.

C: Paper Jam Clearing button

Press this button when removing paper jammed in the manual feed tray.

D: Paper Guides

Align with both sides of the paper stack.

E: USB Port

Plug in the USB cable to connect the printer with a computer.

F: Wired LAN Connector

Plug in the LAN cable to connect the printer to a LAN.

G: Power Cord Connector

Plug in the supplied power cord.

 Do not touch the metal casing.

 Do not plug in or unplug the USB cable or LAN cable while the printer is printing with the computer. This can cause problems.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments