Adjusting Brightness (Windows) - PRO-300

Article ID: ART177244 | Date published: 07/29/2020 | Date last updated: 07/29/2020


Learn how to adjust the brightness of prints when using the imagePROGRAF PRO-300 with a Windows PC.


Adjusting Brightness

You can brighten or darken the colors of the overall image data during printing.
The following sample shows the case when light colors are darkened when the image data is printed.

figure:No adjustment

figure:Darken light colors

No adjustment

Darken light colors

You can also set brightness on the Quick Setup tab by choosing Standard or Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.

  1. Open the printer driver setup window.

  2. On the Main tab, select Manual for Color/Intensity, and click Set....

    figure:Select Manual for Color/Intensity on the Main tab

    The Manual Color Adjustment dialog box opens.

  3. Moving the Brightness slider to the right brightens (dilutes) the colors, and moving the slider to the left darkens (intensifies) the colors.
    You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver.

    Figure: Adjust the Brightness slider (outlined in red)

    After adjusting the brightness, click OK.

  4. Click OK on the Main tab.
    When you print, the data is printed at the adjusted brightness.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments