Sending Scanned Images via E-mail (Mac) - TS8320

Article ID: ART177260 | Date published: 08/03/2020 | Date last updated: 08/04/2020


You can use IJ Scan Utility Lite to e-mail a scanned image when using the PIXMA TS8320.


Sending Scanned Images via E-mail

You can send scanned images via e-mail easily by simply clicking E-mail in the IJ Scan Utility Lite main screen.

 You can also send scanned images via e-mail by using the Document, Photo, Custom, or Driver functions.

  1. Start IJ Scan Utility Lite.

  2. Click Settings..., then set the item type, resolution, etc. in the Settings (E-mail) dialog, and then select an e-mail client.

    When setting is completed, click OK.

  3. Place the item on the platen.

  4. Click E-mail.

    figure: IJ Scan Utility Lite

    Scanning starts.

    When scanning is completed, the specified e-mail client starts and the images will be attached to a new message.

     To cancel the scan, click Cancel.

     The scanned images are saved according to the settings made in the Settings dialog.

     If the Check scan results and specify save settings checkbox is selected in the Settings dialog, the Save Settings dialog appears. After you set the save options and click OK, the scanned images are saved and automatically attached to a new message of the specified e-mail client.

  5. Specify the recipient, enter the subject and message, then send e-mail.

    Refer to the manual of your e-mail client for e-mail settings.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments