If your wireless router has a WPS Push button on it, you can use this button to connect your imagePROGRAF PRO-300 to the wireless network. Follow the steps below to use this method to establish a wireless connection between your printer and wireless router.
-
With the printer powered on, and on the HOME screen, select LAN settings and press the OK button.
-
Wi-Fi will be selected. Press the OK button.
-
Settings will be selected. Press the OK button.
-
Select Wi-Fi setup, then press the OK button.
-
Select WPS (Push button method), then press the OK button.
-
Press the OK button.
-
When the message shown below appears, press and hold the WPS button on your wireless router for about 5 seconds and then release it.
NOTE: The WPS button on your router may look like either of the following:
The button itself may be labelled simply as WPS or Wi-Fi Protected Setup.
Refer to your router's documentation for more information.
After pressing and holding the WPS button on the router for 5 seconds, press the OK button on the printer.
The printer will attempt to connect to the wireless router.
-
The printer will display a message indicating that it has connected to the network.
Press the OK button.
The printer is ready for use across the wireless network.
If you have not already done so, you will need to install the printer driver on your Windows PC or Mac.
Click here to download the driver for Windows.
Click here to download the driver for macOS.