Making Copies
This article shows how to make a copy with the Standard copy function.
-
Make sure that the printer is powered on.
-
Load paper in the cassette or the rear tray.
-
Select 
Copy on the HOME screen.
-
Select Standard copy.
The Copy standby screen is displayed.
-
Load the original item on the scanner glass or in the ADF (Auto Document Feeder).
-
Specify settings as necessary.
-
A: The scanning method and copy layout are displayed.
Switch the scanning method from the ADF and layout (single-sided/two-sided).
-
B: Specify the number of copies.
Tap 
or 
to specify the number of copies.
If you keep touching here, the number scrolls by 10.
You can also flick the number to specify.
-
C: Display the print setting items.
Learn about the settings that can be adjusted.
-
D: Specify the page size and the media type.
-
Tap Black or Color.
The printer starts copying.
Remove the original on the platen or from the document output slot after copying is complete.
Don't open the document cover or remove the original from the platen until scanning is completed.
If you load the original in the ADF, don't move the original until copying is complete.
To cancel copying, tap Stop.
Adding a Copying Job (Reserve copy)
If you load the original on the platen, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen and tap the same button (Color or Black) as the one which you previously tapped.
When you load the original on the platen, move the document cover gently.
When Print qlty (print quality) is set High, you cannot add the copying job.
When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed.
If you tap Stop while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you select Cancel all reservations, you can cancel copying all scanned data. If you select Cancel the last reservation, you can cancel the last copying job.
If you set a document of too many pages to add the copying job, Cannot add more copy jobs. Please wait a while and redo the operation. may appear on the touch screen. Select OK and wait a while, and then try copying again.
If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen when scanning, select OK and tap Stop to cancel copying. After that, copy the documents that have not been finished copying.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________
