Adjusting Copy Settings - TR8620

Article ID: ART177505 | Date published: 09/12/2020 | Date last updated: 09/12/2020
 

Description

Learn about the various settings that can be adjusted when making a copy with the PIXMA TR8620.

Solution

You can change the copy settings such as magnification and intensity.

Print Settings Screen

 For more on the print settings screen or the setting item for Photo copy, see Copying Photos.

The following screen is displayed by selecting Settings in the Copy standby screen.

Example in Standard copy:

Figure: Settings available for Standard Copy

Preview

When Preview is displayed on the print settings screen, selecting Preview allows you to preview an image of the printout on the preview screen.

Figure: Preview screen

 Learn about displaying the Preview screen.

Setting Items

Flick to display setting items and select the setting item to display the settings. Select to specify the setting.

 Depending on the copy menu, some setting items cannot be selected. This article describes the setting items in Standard copy.

The setting item which cannot be selected is displayed grayed out.

 For more on the setting items for Photo copy, see Copying Photos.

 Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, Caution appears on the touch screen. In this case, select Caution on the upper left on the touch screen to check the message and change the setting.

 The settings of the page size, media type, etc. are retained even if the printer is turned off.

 When copying starts in the copy menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the touch screen. Change the setting, following the on-screen instructions.

The following settings can be adjusted.

  • Intensity

    Specify the intensity.

    Figure: Intensity settings

    • A: Select to activate/deactivate automatic intensity adjustment.

      When ON is selected, the intensity is adjusted automatically according to the originals loaded on the platen.

    • B: Drag to specify the intensity.

       When you select ON in the automatic intensity adjustment, the loading documents cannot be loaded in the ADF (Auto Document Feeder).

  • Magnif. (Magnification)

    Specify the reduction/enlargement method.

     Learn about reducing / enlarging copies.

  • Paper src

    Select a paper source (Rear tray Cassette Auto) where paper is loaded.

     When Auto is selected, paper is fed from the paper source where the paper that matches the paper settings (page size and media type) is loaded.

  • Page size

    Select the page size of the loaded paper.

  • Type (Media type)

    Select the media type of the loaded paper.

  • Print qlty (Print quality)

    Adjust print quality according to the original.

     If you use Draft with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again.

     Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.

  • Layout

    Select the layout.

  • ADF duplex scan

    Select whether to perform duplex scanning from the ADF.

  • 2-sidedPrintSetting

    Select whether to perform two-sided copying.

  • Collate

    Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments