Loading Documents in the ADF (Auto Document Feeder) - TR8620

Article ID: ART177508 | Date published: 09/12/2020 | Date last updated: 09/12/2020
 

Description

Learn how to load documents in the ADF (Auto Document Feeder) of the PIXMA TR8620.

Solution

Loading Documents in the ADF (Auto Document Feeder)

Load A4, B5, A5, letter-size originals in the ADF (Auto Document Feeder).

 Be careful not to let anything get inside the document output slot. It may cause damage.

 To scan a document at optimum quality, load it on the (platen) scanner glass.

 The duplex original cannot be scanned automatically by ADF.

  1. Make sure any original has been removed from the platen.

  2. Open document tray (A).

    Figure: Open the document tray (A)

  3. Slide the document guide (B) all the way out.

    Figure: Slide the document guide (B) all the way out

  4. Insert the document WITH THE SIDE TO SCAN FACING UP in the document tray until you hear a beep sound.

    Insert the document until it stops.

     Learn about the supported documents you can load into the ADF or on the platen.

  5. Adjust the document guide to match the width of the document.

    Don't slide the document guide too hard against the document. The document may not be fed properly.

    Adjust the document guide to match the width of the document

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments