Sending a Fax after Speaking on the Telephone - TR8620

Article ID: ART177533 | Date published: 09/16/2020 | Date last updated: 09/17/2020


Learn how to send a fax to a recipient with the PIXMA TR8620 after speaking to them on a connected telephone.


Sending a Fax after Speaking on the Telephone

If you want to speak to the recipient before sending a fax, or if the recipient does not have a fax device that can receive faxes automatically, send a fax manually after speaking to the recipient on the telephone to check whether the recipient can receive faxes.

 It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, we recommend that you send them after speaking on the telephone. See below for the procedure to send a fax manually.

 With manual transmission, you cannot use the platen to load documents. Load the documents in the ADF (Auto Document Feeder).

When loading document on the platen, send a fax with automatic transmission.

 Learn how to send faxes by entering the recipient's number on the touch screen.

 To speak to the recipient before sending a fax, you need to connect a telephone to the printer.

  1. Make sure that the printer is powered on.

  2. Load documents in the ADF.

  3. Select FAX icon FAX on the HOME screen.

    The Fax standby screen is displayed.

  4. Change send settings as necessary.

  5. Lift the handset of the telephone connected to the printer.

  6. Use the connected telephone to dial the recipient's fax/telephone number.

  7. Speak to the recipient.

    When you hear a high-pitched signal instead of the recipient's voice, you cannot check whether the recipient can receive faxes. If you want to stop sending the fax, replace the handset. If you want to send the fax, go to step 8.

  8. Ask the recipient to set their fax device to receive faxes.

  9. When you hear a high-pitched signal, tap Black or Color.

     Color transmission is available only when the recipient's fax device supports color faxing.

  10. Hang up the handset.

     To cancel a fax transmission, tap Stop. To cancel a fax transmission while it is in progress, tap Stop, and then follow the instructions on the touch screen.

     If documents remain in the ADF after Stop is tapped while scanning is in progress, Document in ADF. Remove the document from the document tray and tap [OK]. is displayed on the touch screen. By selecting OK, the remaining documents are automatically ejected.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments