POWER ON / OFF
-
Press and hold the Power button until the LED indicator light turns on.
-
When the LED indicator turns to a steady white, the device is ready to use.
-
Press and hold the Power button to turn off the device.
AUTO POWER OFF
When the device is off for about 5 minutes, it will automatically power off. Press the Power button again to resume using the device. |

|
TAKING AND PRINTING A PHOTO
-
Hold the device and confirm the desire composition of the image.
-
Press the Shutter button to take a photo. The camera will automatically trigger the flash if it is necessary for the lighting conditions.
-
The photo will be printed out immediately after taking the photo if paper is inserted. The device can hold up to around 10 images at a time to print, depending on the SD card capacity.
-
Print queue will be cleared once the device is powered off. It can't be resumed.
-
If no SD card is inserted, the device can hold up to 3 images at a time to print.
-
User can take photos with the device even with no paper if an SD card is inserted. Photos will be saved on the SD card.
|

|
VIEWFINDER
Compose an image with the frame mark in the viewfinder.
SELFIE MIRROR
Compose an image with the frame mark in the Selfie Mirror.
SHOOTING MODES
You can select the different camera modes by moving the slide switch at the top of the device for different scenarios.
|

|
Mode
|
Landscape
|
Portrait
|
Selfie
|
Symbols
|

|

|

|
Metering (Metering in case of a human face)
|
Center Average
(Keep Center Average)
|
Center Average
(Face area weighted)
|
Center Average
(Face area weighted)
|
Focusing (Focusing in case a human face is detected)
|
Center (Keep Center)
|
Center (Focus to human face)
|
Center (Focus to human face)
|
Flash
|
Flash OFF &
Ring Light OFF
|
Flash AUTO &
Ring Light OFF
|
Flash ON &
Ring Light ON
|
If you're about to take a selfie, the ring shape 8 LED Ring Light around the lens gives you uniform illumination on your face. It reduces the left of shadow and allows you to take beautiful shots of your face as a whole, and create a uniform brightness across the entire photo.
*Effective Ring Light Range: 30 cm - 60 cm
|

|
FILTER AND BORDER BUTTONS
FILTER
You can add either a black and white or a vivid filter to a photo by pressing the filter button before taking a photo.
|

Easily add a filter or border to your photos right on the camera.
|

No Filter without Border
|

Black & White FIlter without Border
|

Vivid Filter without Border
|
|
BORDER
You can also add a white border to a photo by pressing the border button before taking a photo.
You can customize the border through the Canon Mini Print app after connecting the CLIQ+ 2 with a compatible smartphone (by default, the border is white).
-
Go to the Home screen, then tap Go wireless! --> Snap.
-
Tap to edit the border.
-
Select the type of border you like, then choose a color. Tap to confirm.

|
LIVE VIEW SHOOT
You can remotely control your CLIQ+ 2 through the Canon Mini Print app.
Go to the Home screen to enter the Live View page.

SHOOT & PRINT
Press
to capture a photo. Press
to begin printing.

TIMER
Press
to instantly capture a photo. Press
and select 3 seconds / 5 seconds / 10 seconds for the timer (by default, the timer is set to OFF). Press
to begin the countdown.
The LED light around the selfie mirror will alert you if the timer is enabled.

ZOOM
Press
to zoom in.

ORIENTATION
Press
to switch between horizontal and vertical orientation.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________