Reducing / Enlarging Copies - TR7020

Article ID: ART177724 | Date published: 10/22/2020 | Date last updated: 10/22/2020
 

Description

Learn how to adjust the magnification of copies made with the PIXMA TR7020.

Solution

Reducing/Enlarging Copies

You can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.

  1. Press the OK button and select Copy settings.

  2. Select Others.

  3. Select Same size.

  4. Select 100% or Fit to page.

    Figure: LCD

    The copy ratio can be specified when you select 100%.

     Some of the reduction/enlargement methods are not available depending on the copy menu.

    • Specifying the copy ratio

      You can specify the copy ratio as a percentage to reduce or enlarge copies.

      Figure: Example of enlarged copy

      Use the up down buttons to specify the reduction or enlargement ratio (25 - 400%), then press the OK button.

      Figure: LCD

       Press and hold the up down button to quickly advance through the ratios.

       When 2-on-1 copy is selected in the layout settings, only a copy ratio of 100% can be set.

    • Fit to page

      The printer automatically reduces or enlarges the image to fit the page size.

      Figure: Example of fit to page copy

       When you select Fit to page, the page size may not be detected correctly depending on the original. In this case, specify the copy ratio.

       When Two-sided copying is selected, Fit to page cannot be selected.

       When you select Fit to page, you cannot load the original in the ADF (Auto Document Feeder).

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments