Changing the Printer Operation Mode (macOS) - TR7020

Article ID: ART177730 | Date published: 10/23/2020 | Date last updated: 10/23/2020
 

Description

Learn how to adjust the modes of operation for the PIXMA TR7020 from a Mac.

Solution

Changing the Printer Operation Mode

If necessary, switch between various modes of printer operation.

  1. With the printer powered on, select Printer settings from the Remote UI

  2. Adjust the following settings as desired:

    Print settings - Prevent paper abrasion

    The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
    Check this check box to prevent paper abrasion.

    Custom settings - Detect paper setting mismatch

    If the check box is deselected, at the time of printing from PC, you can continue to print without the message display even if the paper settings set in the Print dialog differs from the paper information registered to the printer.

    Ink drying wait time

    You can set the length of the printer rest time until printing of the next page begins. The wait time becomes longer as the value set in the list increases, and shorter as the value decreases.
    If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
    Reducing the ink drying wait time speeds up printing.

  3. Click OK.

    The printer will operate with the specified settings.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments