EOS R6: Touch & Drag AF Settings

Article ID: ART177974 | Date published: 11/19/2020 | Date last updated: 09/12/2023


Touch & Drag AF Settings



Touch & Drag AF Settings

You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder.

Touch & Drag AF

  1. Select [Autofocus: Touch & drag AF settings].

  2. Select [Touch & drag AF].

    • Select [Enable].

Positioning Method

You can set how positions are specified by tapping or dragging.

  1. Set [Positioning method].

    • Absolute

      The AF point moves to the tapped or dragged position on the screen.

    • Relative

      The AF point moves in the direction you drag, by an amount corresponding to the amount you drag, no matter where you tap the screen.

Active Touch Area

You can specify the area of the screen used for tap and drag operations.

  1. Set [Active touch area].


  • Tapping the screen when [Face+Tracking] is set displays a round orange frame [Round orange frame]. After you lift your finger at the position to move the AF point to, [Tracking subject] is displayed and that subject is tracked. To cancel subject selection, press SET.




Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments