EOS R5: Auto Exposure Bracketing (AEB)
| Article ID: ART178168 |
| |
Date published: 11/19/2020 |
| |
Date last updated: 08/31/2023 |
Description
Auto Exposure Bracketing (AEB)
Solution
|
Auto Exposure Bracketing (AEB)
In exposure bracketing, three consecutive images are captured at different exposures within your specified range of up to ±3 stops (in 1/3-stop increments) by automatically adjusting the shutter speed, aperture value, or ISO speed.
AEB stands for Auto Exposure Bracketing.
-
Select [ : Expo.comp./AEB].
-
Set the AEB range.
- Turn the
 dial to set the AEB range (1). By turning the  dial, you can set the exposure compensation amount.
- Press
 to set it.
- When you close the menu, the AEB range will be displayed on the screen.
-
Take the picture.
Standard exposure
Decreased exposure
Increased exposure
- Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure.
- AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display.
Caution
- Exposure compensation in AEB may be less effective with [: Auto Lighting Optimizer] () set to an option other than [Disable].
Note
- [
 ] blinks in the lower left of the screen during AEB.
- If the drive mode is set to [
 ], press the shutter button three times for each shot. In [ ], [ ], or [ ] mode, holding down the shutter button completely captures three images, one after another, before the camera automatically stops shooting. When [ ] or [ ] is set, three consecutive shots are captured after a delay of 10 or 2 sec.
- You can set AEB in combination with exposure compensation.
- AEB is not available in flash photography or bulb exposures, or with Multi Shot Noise Reduction, HDR mode, focus bracketing, or when electronic shutter is set.
- AEB will be canceled automatically if you do any of the following: Setting the power switch to
 or when the flash is fully charged.
|
SIMS Doc Id
1605628145669196749
