Wi-Fi Connection via Access Points

Camera Access Point Mode
Manual IP Address Setup

This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode).

First, check the position of the WPS button and how long to press it. It may take approx. 1 min. to establish a Wi-Fi connection.

Select [: Wi-Fi/Bluetooth connection].
Select an option.
- If the history () is displayed, press the keys to switch screens.
Select [Add a device to connect to].
- The following message is displayed if you have selected [ Connect to smartphone]. If Camera Connect is already installed, select [Do not display].
- On the [Connect to smartphone] screen displayed next, select [Connect via Wi-Fi].
Select [Switch network].
- Displayed when [], [], or [] is selected.
Select [Connect with WPS].
Note
- For [Camera access point mode] displayed in step 5, see Camera Access Point Mode.
Select [WPS (PBC mode)].
- Select [OK].
Connect to the access point via Wi-Fi.
- Press the access point’s WPS button.
- Select [OK].
Select [Auto setting].
- Select [OK] to access the setting screen for the Wi-Fi function.
- If an error occurs with [Auto setting], see Manual IP Address Setup.
Specify the settings for the Wi-Fi function.

[ Connect to smartphone]
- On the smartphone’s Wi-Fi setting screen, tap the SSID (network name) shown on the camera, then enter the password of the access point for the connection.
Go to step 8 in Wi-Fi Connection without Using Bluetooth.

[ Remote control (EOS Utility)]

Go to step 7 or 8 in Steps on the computer (2).

[Print from Wi-Fi printer]

Go to step 6 in Connecting to a Printer via Wi-Fi.

Register image.canon.

Go to step 5 in Registering Image.Canon.

Camera Access Point Mode

Camera access point mode is a connection mode for connecting the camera directly to each device via Wi-Fi. Displayed when [ Smartphone ], [ Computer ], or [ Printer ] is selected after [ Wireless settings : Wi-Fi/Bluetooth connection].

Manual IP Address Setup

The options displayed vary depending on the Wi-Fi function.

Select [Manual setting].
- Select [OK].
Select an option.
- Select an option to access the screen for numerical input.
- To use a gateway, select [Enable], then select [Address].
Enter the desired values.
- Turn the dial to move the input position in the upper area, and use the keys to select numbers to enter. Press to enter the selected number.
- To delete the number just entered, press the button.
- Select [OK] after the numbers have been entered. Display returns to the screen in step 2.
Select [OK].
- When you have completed setting the necessary items, select [OK].
- If you are not sure what to enter, see Checking Network Settings, or ask the network administrator or another person knowledgeable about the network.