Erasing Images from the EOS M50 Mark II.
Article ID: ART178407 |
| |
Date published: 11/19/2020 |
| |
Date last updated: 01/22/2021 |
Description
Erasing Images from the EOS M50 Mark II.
Solution
Erasing Images
You can either select and erase unnecessary images individually or erase them in one batch. Protected images () will not be erased.
Caution
- Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
Erasing Images Individually
-
Select the image to be erased.
- Press the button.
- Use the keys for selection.
-
Press the key.
-
Erase the images.
JPEG or RAW images or movies
RAW+JPEG images
Selecting ([]) Multiple Images to Erase Together
By adding checkmarks to the images to be erased, you can erase all those images at once.
-
Select [: Erase images].
-
Select [Select and erase images].
-
Select an image.
- Use the keys to select an image to erase, then press .
- To select another image to be erased, repeat step 3.
- Press the button, then press [OK].
-
Erase the images.
Specifying the Range of Images to Erase
While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once.
-
Select [Select range].
-
Specify the range of images.
- Select the first image (start point).
- Next, select the last image (end point).
-
Press the button.
-
Erase the images.
Erasing All Images in a Folder or on a Card
Note
- To erase all the images including protected images, format the card ().
|
SIMS Doc Id
1605640553648515073