Using the Self-Timer on the EOS M50 Mark II.
Article ID: ART178487 |
| |
Date published: 11/19/2020 |
| |
Date last updated: 11/25/2020 |
Description
Canon : Product Manual : EOS M50 Mark II : Using the Self-Timer
Solution
Using the Self-Timer
-
Select [: Drive mode].
-
Select an option.
-
Take the picture.
- Focus on the subject, then press the shutter button completely.
- To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen.
- The self-timer lamp blinks faster approx. 2 sec. before the shot.
Caution
- With [], the shooting interval may become longer under some shooting conditions, depending on image quality, use of flash, and other factors.
Note
- [] can be used to start shooting without touching the camera and avoid camera shake when it is mounted on a tripod for still-life or long exposure shots.
- After taking self-timer shots, playing back the image () to check focus and exposure is recommended.
- When using the self-timer to shoot yourself, use focus lock () on an object at the same distance as where you will stand.
- To cancel the self-timer, either tap the screen or press .
- Auto power off time may be extended when the camera is set for remote control shooting.
|
SIMS Doc Id
1605640552071097736