Placing a Printable Disc - PRO-200

Article ID: ART178660 | Date published: 11/24/2020 | Date last updated: 11/24/2020
 

Description

Learn how to load a printable disc into the PIXMA PRO-200.

Solution

To print onto a printable disc, place it on the supplied multi-purpose tray, and then insert it into the printer.

 Do not mount the multi-purpose tray until the message prompting you to load the printable disc appears. Doing so can damage the printer.

 Remove any paper in the manual feed tray.

 If test printing is executed onto test printing paper, depending on the paper type, the printer may not be able to read its size correctly, preventing the border areas from being printed. Test printing paper should be used for purposes of checking the envisioned layout.

  1. Take out the multi-purpose tray from the multi-purpose tray storage compartment.

    Take out the multi-purpose tray from the multi-purpose tray storage compartment

  2. Gently open the paper output tray (A).

    Gently open the paper output tray (A)

  3. When a message prompting you to load a printable disc appears, open the multi-purpose tray guide (B).

    When a message prompting you to load a printable disc appears, open the multi-purpose tray guide (B)

  4. Place a printable disc on the multi-purpose tray.

     Check that there is no dirt on the multi-purpose tray before placing a printable disc on it.

     When placing a printable disc on the multi-purpose tray, don't touch the printing surface of the disc or the reflectors (C) on the multi-purpose tray.

    When placing a printable disc on the multi-purpose tray, don't touch the printing surface of the disc or the reflectors (C) on the multi-purpose tray

    1. WITH THE PRINT SIDE FACING UP, place a printable disc, and press it against the lock (D) at bottom.

      WITH THE PRINT SIDE FACING UP, place a printable disc, and press it against the lock (D) at bottom

    2. While pressing down the lock with the printable disc, insert the top of the printable disc into the slits (E).

      While pressing down the lock with the printable disc, insert the top of the printable disc into the slits (E)

  5. Place the multi-purpose tray on the multi-purpose tray guide.

    Place the multi-purpose tray on the multi-purpose tray guide

  6. Insert the multi-purpose tray straight in the horizontal direction until the arrow (Arrow on the multi-purpose tray) on multi-purpose tray guide is approximately aligned with arrow (Arrow on the multi-purpose tray) on the multi-purpose tray.

     Don't insert the multi-purpose tray beyond the arrow (Arrow on the multi-purpose tray) on the multi-purpose tray guide.

    Don't insert the multi-purpose tray beyond the arrow on the multi-purpose tray guide

 The multi-purpose tray may be ejected after a certain amount of time passes. In such a case, follow the on-screen instructions to place the multi-purpose tray again.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments