Parts of the Printer (Front View) - PRO-200
Article ID: ART178668 | Date published: 11/25/2020 | Date last updated: 11/25/2020


Learn about the parts found on the front of the PIXMA PRO-200.


Figure: Front view of printer

A: Top Cover

Open to replace an ink tank or to remove jammed paper inside the printer.

B: Top Feed

Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.

You can load paper or envelopes here.

C: Paper Guides

Align with both sides of the paper stack.

D: Paper Support

Open to load paper in the top feed.

E: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

F: Operation Panel

Use to change the settings of the printer or to operate it.

G: Paper Output Tray

Printed paper is ejected. Open it before printing.

H: Output Tray Extension

Open to support ejected paper.

I: Paper Output Support

Pull out to support ejected paper.

J: Multi-purpose Tray Guide

Place the multi-purpose tray here.

Front view, output tray closed

K: Multi-purpose Tray Storage Compartment

The multi-purpose tray supplied with the printer can be stored here.

L: ON lamp

Lights after flashing when the power is turned on.

M: ON button

Turns the power on or off

N: Stop button

Cancels a print job in progress.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.