Parts of the Printer (Rear View) - PRO-200

Article ID: ART178669 | Date published: 11/25/2020 | Date last updated: 11/25/2020
 

Description

Learn about the parts found on the PIXMA PRO-200 when viewing it from its rear side.

Solution

Figure: Rear view of printer

A: Paper Support

Pull out to load paper in the manual feed tray.

B: Manual Feed Tray

Load one sheet of 8" x 10" (20 x 25 cm) size paper or larger, or thick paper at a time.

C: Paper Jam Clearing button

Press this button when removing paper jammed in the manual feed tray.

D: Paper Guides

Align with both sides of the paper stack.

E: USB Port

Plug in the USB cable to connect the printer with a computer.

F: Wired LAN Connector

Plug in the LAN cable to connect the printer to a LAN.

G: Power Cord Connector

Plug in the supplied power cord.

 Don't touch the metal casing.

 Don't plug in or unplug the USB cable or LAN cable when sending print jobs to the printer.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments