Print settings

To access the Print settings menu, follow the steps below.

1. With the printer powered on, press the Setup  button.

2. Use the   buttons to select Device settings, then press the OK button.

3. Use the   buttons to select Print settings, then press the OK button.

Adjust the settings as desired by using the   buttons and the OK button:

• Prevent abrasion

  Use this setting only if the print surface becomes smudged.

   Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.

• Amount of extension

  Selects the amount of image that extends off the paper when printing in borderless (full).

  When performing Borderless Printing, slight cropping may occur at the edges since the printed image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed.

   Settings will become ineffective in the following situations:

  • Printing from a standard form.

   When performing settings from application software or the printer driver, these settings will be prioritized.

   If printouts contain margins even though you are printing in Borderless, specifying Amount: Large for this setting may help solve the problem.

• Plain paper target

  Select Text only or Text and photos for plain paper printing.

   As print results, if you are conscious of unevenness or textures of granularity, select Text and photos.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________