Changing the Printer Operation Mode (macOS) - TS6420

Article ID: ART179305 | Date published: 02/17/2021 | Date last updated: 02/17/2021
 

Description

Learn how to change the operation mode of the PIXMA TS6420 when using it with a Mac.

Solution

If necessary, switch between various modes of printer operation.

  1. Check whether the printer is on and select Device settings from the Remote UI.

  2. Adjust the following settings as desired:

    Print settings - Prevent paper abrasion

    The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
    Check this check box to prevent paper abrasion.

    Custom settings - Detect paper setting mismatch

    If the check box is deselected, at the time of printing from PC, you can continue to print without the message display even if the paper settings set in the Print dialog differs from the paper information registered to the printer.

    Ink drying wait time

    You can set the length of the printer rest time until printing of the next page begins. The wait time becomes longer as the value set in the list increases, and shorter as the value decreases.
    If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
    Reducing the ink drying wait time speeds up printing.

  3. Click OK.

    The printer operates with the specified settings.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments