Reducing / Enlarging Copies - TS6420

Article ID: ART179385 | Date published: 02/23/2021 | Date last updated: 02/23/2021


Learn how to enlarge or reduce copies when using the PIXMA TS6420.


When making copies, you can either manually adjust the magnification, or you can fit a copy to a page. Follow the steps below to specify which method to use when making copies.

  1. Press the OK button and select Copy settings.

  2. Select Others.

  3. Select Same size.

  4. Select 100% or Fit to page.

    Figure: LCD

    The copy ratio can be specified when you select 100%.

     Some of the reduction/enlargement methods are not available depending on the copy menu.

    • Specifying the copy ratio

      You can specify the copy ratio as a percentage to reduce or enlarge copies.

      Example of copy ratio

      Use the up down button to specify the reduction or enlargement ratio (25 - 400%), then press the OK button.

      Figure: LCD

       Press and hold the up down button to quickly advance through the ratios.

       When 2-on-1 copy is selected in the layout settings, only a copy ratio of 100% can be set.

    • Fit to page

      The printer automatically reduces or enlarges the image to fit the page size.

      Fit to page example

       When you select Fit to page, the page size may not be detected correctly depending on the original. In this case, specify the copy ratio.

       When Two-sided copying is selected, Fit to page can't be selected.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments