You can connect the PIXMA PRO-200 to a wireless network using the WPS (Wi-Fi Protected Setup) push button method. This will allow you to connect the printer to the network without having to enter the wireless network password. To connect the printer to the network with this method, follow the steps below.
-
With the printer powered on and displaying the HOME screen, use the up and down arrows to select LAN settings, then press the OK button.
-
Wi-Fi will be selected. Press the OK button.
-
Settings will be selected. Press the OK button.
-
Select Wi-Fi setup, then press the OK button.
-
Select WPS (Push button method), then press the OK button.
-
When this message appears, press the OK button.
-
Press and hold the WPS button on your router for a few seconds, then press the OK button on the printer.
The printer will attempt to connect to the network.
-
When the printer has connected, press the OK button.
After the printer has been connected to the wireless network, you'll need to download and install drivers and software.
The driver package for Windows can be found here.
The driver package for macOS can be found here.
After downloading the driver package, open it and follow any on-screen instructions.
If the printer isn't found on the network during the installation, you may need to temporarily disable any active firewall software, or disconnect from any Virtual Private Networks (VPNs) that the computer is connected to.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________
