Set Up the TR8620 to the Wireless Network - WPS Push Button Method

Article ID: ART179403 | Date published: 02/26/2021 | Date last updated: 02/26/2021
 

Description

Learn how to use the WPS push button method to connect the PIXMA TR8620 to a wireless network.

Solution

Your printer can be connected to a wireless router via the WPS push button method. This will allow you to establish a wireless connection between the printer and router without having to enter in the network password. To establish a wireless connection via the WPS push button method, follow these steps.

  1. With the printer powered on and displaying the HOME screen, tap the network symbol at the lower left.

    Tap the network symbol (outlined in red)

  2. Tap Wi-Fi.

    Tap Wi-Fi (outlined in red)

  3. Tap Wi-Fi setup.

    Tap Wi-Fi setup (outlined in red)

  4. Tap WPS (Push button method).

    Tap WPS (Push button method) (outlined in red)

  5. When this message appears, tap OK.

    Tap OK (outlined in red)

  6. Press and hold the WPS button on your wireless router for a few seconds. Then, tap OK.

    After pressing and holding the WPS button on the router, tap OK (outlined in red)

     Refer to the wireless router's documentation for more informaiton on the WPS button.

    The printer will attempt to connect to the router.

  7. When the printer has established its connection, tap OK.

    Tap OK (outlined in red)

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments