Wireless Setup - Windows** Computers
**Instructions in this article are for setup on a Windows computer. If setting up on a Mac, click here for instructions
To be able to use the PIXMA TS series printer to print or scan wirelessly on a Windows computer, the printer must first be connected to the wireless network. Then, drivers and applications must be installed on the computer. The instructions / screenshots below show the setup program steps when using the Easy wireless connect method to connect to the wireless network.
The setup process consists of 2 parts:
-
Starting Easy wireless connect on the printer, and
-
Downloading and running the setup file to install the drivers and software.
Start Easy wireless connect on the printer.
Prior to starting setup on the computer, start the Easy wireless connect process on the printer. Then complete the setup on the computer.
See the procedure below to start the Easy wireless connect.
-
Press and hold the Wireless connect button (A) on the printer, and then release the button when
(B) flashes.

-
Make sure
and the horizontal bars (C) flash as shown in the illustration below.

Download and run the setup file.*
Get the Setup File
-
Run the setup file and click Start Setup.

-
Read the network security notice and click Next.

The installer will acquire information on the latest driver and software available for the printer. This may take several minutes.

-
Read the license agreement. Select Yes to continue. If you click No, the installation won't continue.

-
Select Agree or Do not Agree to the information request.

If you select Do not agree, a message will appear. Click OK to continue.

After processing for a few moments, the instailer will check the printer's status.

-
Select Yes to confirm the connection method.

Your computer's network connection will be temporarily disabled.

-
** Depending on your network setup, the following screens may appear. Be sure to select an SSID (network) in the dropdown list running on the 2.4Ghz frequency. If not sure, check with your router's documentation. After selecting the SSID, enter the password in the next screen


-
The connection is completed. Click Next.

If your printer isn't detected, you may need to temporarily disable any security software, or, if you don't want to do that, you may need to open up ports that the printer uses for network communcation. Please refer to the documentation for your security software for information on how to open these ports.
The MP Drivers for your printer will be installed. This may take several minutes.

- Click Next.

-
Click Continue online.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:

