How to Disable IPv6 - TR7020

Article ID: ART180164 | Date published: 07/26/2021 | Date last updated: 07/26/2021
 

Description

If your PIXMA TR7020 is connected to your wireless network but does not have an IPv4 address, disabling IPv6 may help resolve this problem.

Solution

To disable IPv6 on your PIXMA TR7020, please follow the steps below. 

  1. With the printer powered on, press the OK button.

    Figure: LCD

  2. Use the up or down arrows until LAN settings is selected.  Then, press the OK button.

    LAN settings selected

  3. Wi-Fi will be selected.  Press the OK button.

    Wi-Fi selected

  4. Use the up or down arrows until Advanced is selected.  Then, press the OK button.

    Advanced selected

  5. Use the up or down arrows until TCP/IP settings is selected.  Then, press the OK button.

    TCP/IP settings selected

  6. Use the up or down arrows until IPv6 is selected.  Then, press the OK button.

    IPv6 selected

  7. Yes will be selected.  Press the OK button.

    Yes selected

  8. Enable/disable IPv6 will be selected.  Press the OK button.

    Enable/disable IPv6 selected

  9. Use the up or down arrows until Disable is selected.  Then, press the OK button.

    Disable selected

IPv6 will be disabled.

To enable IPv6, follow the steps above, but select Enable and press the OK button.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments