Ask a Question

Reducing the Cutting Speed - Mk2600

Article ID: ART180187 | Date published: 08/03/2021 | Date last updated: 08/03/2021
 

Description

This article explains how to reduce the cutting speed of the Mk2600.

Solution

Reducing the cutting speed

If cutting is not performed smoothly for certain types of tube or label tape, try reducing the cutting speed. The cutting speed can be adjusted to one of two levels (Normal and Low) for half cuts and full cuts, respectively. This adjustment can also be made separately for different types of print media.

ex. Full cutting does not work well, so reduce the cutting speed.

  1. Press [Adjust].

  • The Print Media display appears.

Print Media display

  1. Press Up arrow or Down arrow to select Tube, then press [Enter].

  • Select the type of print media for which the adjustment is to be made.

  • Press [Enter] to display the Adjustments display.

 The cutting speed can be set separately for different types of printing media.

Adjustments display

  1. Press Up arrow or Down arrow to select Full cut, then press [Enter].

  • The Full Cut display appears.

Full Cut display

  1. Press Up arrow or Down arrow to select Speed, then press [Enter].

  • The cutting speed adjustment display appears.

Cutting speed adjustment display

Indicates that the cutting speed is set to the normal setting.

  1. Press Up arrow or Down arrow to select Low.

Low is highlighted

  1. Press [Enter].

  • The display returned to the character entry screen. The cutting speed has now been reduced.

 

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments