Removing the Print Media - Mk2600

Article ID: ART180199 | Date published: 08/04/2021 | Date last updated: 09/14/2021
 

Description

This article provides information on removing the print media from the Mk2600.

Solution

Removing the print media

When changing the print media from tube to label tape, or from label tape to tube, it is necessary to take out the media that is currently set in the printer. However, because the printer feeds tube or label tape into its transport rollers, it is not possible to simply pull out the current media. It is first necessary to perform the operation described below to release the tube or label tape that has been fed into the unit.

 These operations are the same for heat shrink tube, wrap around tape, 4mm I.D. strip, plate and clear tube.

 Even after the printing media has been removed, the printer will continue to operate.

  1. Press [Remove].

  • A confirmation display appears.

Confirmation display

  1. Press Left arrow or Right arrow to select Yes, then press [Enter].

  • The screen to the right appears, and the tube or label tape is released by the transport rollers.

Once the preparations described above have been completed, take out the printing media as described below.

 After pressing [Enter], use the feed function if the tube or label is not released from the transport roller (unable to remove) even after the printer has stopped.

Unloading...

  1. Open the cover.

Open the cover

  1. (Tube and plate only) Pull the tube or plate out of the attachment.

Pull the tube or plate out of the attachment

  1. Detach the attachment or the media cassette from the printer.

Detach the attachment or the media cassette from the printer

  1. Close the cover.

Close the cover

  1. Prepare to print.

 

 Confirm that the ribbon is not slacked.

Tighten the ribbon if the ribbon is slacked when removing the tube or label tape.

Tight the ribbon if it has slack

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments