Printing with short pitch width
By selecting Expansion on the Plate Printing Area selection display and selecting the character size and number of lines accordingly, the printable number of characters within the short pitch will increase.
If Expansion is selected on the Plate Printing Area selection display, only plates can be used as the printing media.
Printing on a plate for a narrow width terminal block.
ex. Create the following plate for a 5mm wide terminal block.
Print the following 5 characters on a plate in 5mm width.
-
Press [Char Size].
|
|
-
Press [Set Lines].
|
A check mark is displayed next to the currently selected number of lines.
|
-
Press [Seg Len].
|
Segment length range that can be specified
|
|
Plate Printing Area
|
If Expansion is selected on the Plate Printing Area selection display, only plates can be selected as the printing media.
|
-
The message appears.
-
Press [Enter].
|
|
Alignment
|
|
|
All line centering
-
Press  or  to select On.
-
Press [Enter].
|
|
-
Enter characters.
|
|
Only 1.3mm double-byte characters can be set to three lines.
The maximum number of printable characters depends on the segment length setting.
If you wish to increase the number of printable characters
When Normal is selected on the Plate Printing Area selection display, spaces are automatically inserted at the left and right of the printer. When Expansion is selected, the printing area expands all over the segment length without inserting any space.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________
