Message
|
Description
|
Action
|
Cannot modify.
|
An attempt was made to select an unavailable setting.
|
Check the User's Guide and make the correct setting.
|
In Vert/Hor char, Character Space setting not possible.
|
An attempt was made to enter a value that is outside of the settable range.
|
Check the User's Guide and make the correct setting.
|
No data to paste.
|
The paste operation was attempted while there was no page data to be pasted.
|
Prepare to be pasted by cutting or copying a page.
|
Not enough memory.
Character input is no longer possible.
|
An attempt was made to enter characters when there was insufficient free space in memory.
|
Delete some input data to free up some space.
|
Length exceeded. Input data exceeds set length.
|
An attempt was made to enter a value that is outside of the settable range.
|
Check the User's Guide and make the correct setting.
|
Numbering already set for this page.
|
An attempt was made to enter characters in excess of the number of characters that can be entered.
|
Enter only the allowed number of characters.
|
xxxxxx already exists.
Change the folder name.
|
An attempt was made to specify a folder name that already exists.
|
Specify a different folder name.
|
Not enough memory.
Cannot save any more files.
|
An attempt was made to save a file while there was insufficient free space remaining.
|
Delete any unnecessary files to create free space.
|
No files.
|
An attempt was made to load or delete a file even though no files have been saved.
|
Confirm the file save destination folder. Save the file once more.
|
No files in selected folder.
|
An attempt was made to load or delete a file in a folder even though no files have been saved in that folder.
|
Already 99 files in selected folder.
|
An attempt was made to save more than 99 files in a single folder.
|
Either delete any unnecessary files and then save the desired files in that folder, or else save the files in a different folder.
|
Symbol can not be input with 1.3mm font.
|
Symbols cannot be entered when the character size is set to 1.3 mm.
|
Change the character size to a value other than 1.3 mm.
|
Number of the characters over.
Cannot change.
|
An attempt was made to select Auto on the Segment Length selection display for the page in which a maximum number of characters were entered with Expansion selected on the Plate Printing Area selection display.
|
Delete characters to reduce the number of characters to a changeable one, and then change the setting.
|
Cannot input.
Change length or character size.
|
The specified character size or segment length does not allow you to enter characters.
|
Change the segment length or character size.
|
Don't operate. 3 lines in the page.
|
The page to be divided or combined contains data entered on three lines.
|
Edit or delete the pages on which characters are entered on three lines.
|
No character data.
|
An attempt was made to print even though no character data exists.
|
Enter character data before printing.
|
No media.
|
An attempt was made to print while no printing media has been loaded.
|
Load the print media and then press [Enter] to begin printing.
|
No Ribbon cassette.
|
An attempt was made to print while no ribbon cassette was installed.
|
Install a ribbon cassette.
|
End of media.
Pull out print media.
|
The end of the printing media was reached while printing was in progress.
|
Take out the printing media from the printer, and replace it with new printing media.
|
Replace print media.
|
The printing media was removed after the End of media message was displayed.
|
Insert the new printing media and then press [Enter] to resume printing.
|
End of ribbon
Replace ribbon cassette.
|
The end of the ribbon cassette was reached while printing was in progress.
|
Install a new ribbon cassette, then press [Enter] to resume printing.
|
Start of media not detect.
Remove media between print head and cutter.
|
An operation was attempted while the printing media was not inserted properly.
A printing media is jammed between the print head and cutter.
|
Take out the printing media, reinstall it correctly, then press [Enter].
Remove the printing media between the print head and cutter, then press [Enter].
|
Cannot initialize print head position.
|
It is impossible to initialize the print head position for some reason.
|
Press [Enter]. If the same message appears again, contact your dealer.
|
Cannot move print head to print position.
|
It is impossible to move the print head to the printing position for some reason.
|
Press [Enter]. If the same message appears again, contact your dealer.
|
Cannot initialize cut position.
|
It is impossible to initialize the cutter position for some reason.
|
Press [Enter]. If the same message appears again, contact your dealer.
|
Data check
Resetting completely
|
An error was found in the data for some reason, so all of the data was initialized.
|
Set up the printer functions again. Check the saved data, then enter / save data again.
|
Close cover and press any key.
|
An operation was attempted while the cover was open.
|
Close the cover and press any key.
|
Power turned off when saving file.
Checking saved data.
|
The power was turned off while a file was being saved. Any bad data will be deleted.
|
Check the saved files. Enter / save again the data being entered or the file not saved.
|
Power turned off when loading file. Resetting input data.
|
The power was turned off while a file was being loaded. The entered data will be deleted.
|
Power turned off when deleting file. Checking saved data.
|
The power was turned off while a file was being deleted.
|
Check the saved files. Delete the files that have not yet been deleted.
|
Media JAM
Enter / Cancel
|
Tube or label tape is jammed.
|
Remove the jammed object.
|
Printing...
Ribbon will end soon
|
Remaining ribbon is low when printing. (approximately 10m remaining)
|
Have a new ribbon cassette ready.
Replace with new ribbon cassette if printing a long document.
|
No ribbon information.
No ribbon amount displayed.
Press enter
|
The printer could not properly communicate with the ribbon cassette.
Or, the end of the ribbon has been reached and the relevant information has been written on the ribbon.
|
Follow the instructions on the screen.
|
If PlatePrintingArea is Expansion, the media become only the Plate
|
Expansion has been selected on the Plate Printing Area selection display.
|
Only plates can be used as printing media. If you wish to print characters on another media type, select Auto on the Seg Length selection display.
|