Print settings

Follow these steps to access Print settings on the printer.

1. With the printer powered on, press the Setup  button.

2. Press the right arrow  button until Device settings appears, then press the OK button.

3. Print settings will be displayed. Press the OK button.

The following settings can be adjusted:

• Prevent abrasion

  Use this setting only if the print surface becomes smudged.

   Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.

• Amount of extension

  Selects the amount of image that extends off the paper when printing in borderless (full).

  When performing borderless printing, slight cropping may occur at the edges since the printed image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed.

   Settings will become ineffective in the following situations:

  • Printing from a standard form.

   When performing settings from application software or the printer driver, these settings will be prioritized.

   If printouts contain margins even though you are performing borderless printing, specifying Amount: Large for this setting may help solve the problem.

• Auto photo fix set.

  Selecting ON will prioritize the printing of the Exif information in the image.

• Prevent double-feed

  Select ON to prevent double-feed of plain paper.

   Be sure to set this back to OFF after printing since it may result in lower printing speed.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________