Changing the Printing Orientation
It is possible to print characters with their orientation changed as shown below. It is also possible to change the oriantation on a page basis or for all pages together after entering characters.
The printing orientation of each page can be changed.
Horizontal Character
|
|
Vertical Character
|
|
ex. Print label tape (12mm wide) as shown below.
1. Press Format.
|
|
2. Press or to select 1: Format, then press [Enter].
|
|
3. Press or to select 2: Vertical, then press [Enter].
|
|
4. Press [Style].
|
|
5. Press or to select 2: Line, then press [Enter].
|
|
6. Press or to select 2: 2 lines, then press [Enter].
|
|
7. Input 12V. |
Confirm that the characters that are entered are displayed on their side.
|
8. Press or .
If you press [Enter] instead of or , a new page is created.
|
|
9. Input 24V.
|
|
10. Press [Print / Print Option].
|
|
11. Press or to select 4: Label, then press Label size [Enter].
|
|
12. Press or to select 3: 12mm, then press Print [Enter].
|
|
13. Press [Enter].
|
|
14. Confirm the location of the leading end of the loaded label tape, press or to select the input side, then press [Enter].
|
|
If the lead end of the loaded label tape is at transport roller 2, select [IN], and if it is at the cutter side, select [OUT].
|
|
Canceling printing
If you press [Cancel], the message Aborting print appears and printing is aborted. In this case, label tape that is currently being printed is cut and then ejected.
|
|
Printing might not be performed correctly in some orientations, depending on the settings for the media size and the character size.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________