Turn the Power Switch On
Before turning the power switch on, make sure that the cassettes and tube have been inserted properly, that the cover is closed, and that the AC adapter has been properly connected.
1. Press the "|" side of the switch.
|
|
|
Startup display
|
The character input display appears immediately if no ribbon cassette is installed.
|
Ribbon cassette information display
|
Do not turn the power switch on and off rapidly. This can cause misoperation and the loss of stored data.
Inputting characters
ex. Print four each of the following tube segments.
Tube to be used: 3.0mm
1. Enter 200V
To enter uppercase letters or the characters appearing on the upper half of the keycaps, press and hold the [Shift] key, and then press the desired key. If you enter a wrong character by mistake, press [Back Space] to delete the character and then enter the correct character.
|
|
2. Press [Enter].
|
|
3. Enter Pump Room.
If you enter an incorrect character, press [Back Space] to delete the character, then enter the correct character.
|
|
4. Press [Enter].
|
|
5. Enter A1.
|
|
If you accidentally enter an incorrect character (e.g. Entering 240V instead of 200V):
1. Press or and move the cursor to the 0.
|
|
2. Press [Back Space] to delete the 4.
|
|
3. Press 0 to enter the correct character.
|
|
To delete all entered text:
1. Press [Delete].
|
|
2. Press [Enter].
|
Go on to the next step.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________