Replacing a Tube or the Label Tape Cassette - Mk1500

Article ID: ART180397 | Date published: 09/14/2021 | Date last updated: 09/14/2021
 

Description

Learn how to replace a tube or label tape cassette in the Mk1500.

Solution

Replacing a Tube or Label Tape Cassette

Remove the tube or label tape cassette as follows, and install a new one.

 This procedure for replacing a label tape cassette also applies when using heat shrink tube, wrap around tape and 4mm I.D. strip. Clear tubing and plates are handled in the same way as regular tube.

  1. Press [Remove] and then [Enter].

  • Media is ejected in the opposite direction.

 After pressing [Enter], use the feed function if the tube or label is not released from the transport roller (unable to remove) even after the printer has stopped.

  1. Open the cover.

Open the cover

  1. Remove the tube attachment or label cassette from the machine.

  • While pulling the lever to the right, lift and detach the label tape cassette.

Pull the lever to the right, then lift and detach the label tape cassette

  1. Install the new tube or label tape cassette.

Install the new tube or label tape cassette

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments