Entering Letters, Numbers, and Symbols - Mk1500

Article ID: ART180400 | Date published: 09/14/2021 | Date last updated: 09/14/2021
 

Description

This article provides information regarding entering letters, numbers, and symbols on the Mk1500.

Solution

Entering characters

Enter the following characters:
ex. Res 7-1

  1. Enter Res 7-1.

 To enter uppercase letters or the characters that appear on the top half of the keycaps, press and hold the [Shift] key, then press the desired key.

If you enter an incorrect character

Press [Back Space] to delete the character and then enter the correct one.

Res 7-1 on screen

 To enter uppercase letters only

If you only want to enter uppercase characters (for example, SYSTEM), it is more convenient to press the [Caps Lock] key than type while holding down the [Shift] key. When you press the [Caps Lock] key, letters are entered as uppercase letters and the system is set to Caps Lock input mode. If you want to enter a lowercase letter while in Caps Lock input mode, simply type it by holding down the [Shift] key.

 

Entering symbols

Enter the following characters:

ex. 250 ohms

 When the character size is set to 1.3 mm, no symbol can be entered.

  1. Enter 250.

If you enter an incorrect character

Press [Back Space] to delete the character and then enter the correct one.

250 entered

  1. Press [Symbol].

  • The symbol selection display appears.

Symbol selection display

  1. Press Left arrowUp arrowRight arrow, or Down arrow to select .

The symbol is selected

  1. Press [Enter].

  • This enters the symbol .

The symbol is displayed

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments